BOSCH SMART SYSTEM · DIRECTLY IN YOUR BROWSER
Enable Low Power Port and High Power Port
Low Power Port and High Power Port are additional power outputs for compatible accessories. Read for free whether your Bosch Smart System permits changes. You can then enable or disable the permitted ports.
One or both ports: €4.99 total including VAT. Unselected ports stay unchanged.
Android with Chrome · Windows PC with Chrome/Edge · USB data cable
Internal test: this feature is not yet released for customers.
Reading and selection are free · includes 19% VAT · no subscription · suitable voucher accepted. After payment or voucher redemption, you confirm the transfer separately.
Connect eBike
Switch on your eBike and connect it to your Android device or Windows PC with a USB data cable. End other diagnostic connections to this bike first. Android requires USB host/OTG; allow Chrome USB access when Android asks.
No eBike connected yet.
Settings stored in the bicycle
- Bicycle ID
- –
- Motor / software
- –
- Low Power Port
- –
- Low Power Port · Manufacturer permission
- –
- High Power Port
- –
- High Power Port · Manufacturer permission
- –
- Read at
- –
Check last power-port attempt
Do not pay or transfer again. Check the existing order or contact BlauWerk with your order number.
To help resolve the issue, you can send the current port values to BlauWerk. This only reads data. Submitting them does not complete the order or start a new write attempt.
Which ports would you like to change?
Choose one or both ports. Leave unchanged keeps the current state. Ports that are blocked or not clearly identified cannot be selected.
One order costs €4.99 in total, whether you change one or both ports. Connected accessories are not automatically tested.
Payment or voucher
A one-off total of €4.99 including 19% German VAT for one or both selected ports. No subscription. An eligible voucher can be used instead; no invoice is issued for voucher redemption.
Payment opens in a separate tab. Keep this page and the eBike connected. Once authorized, confirm the transfer here separately.
Order: Not created yet
Before cancelling, the server checks that no payment, voucher redemption or transfer has started.
Change before transfer
Your order is authorised. Check the settings, tick the box and click “Apply power-port settings now”.
- Bicycle
- Current
- Requested
Power-port settings confirmed
Both port settings were read back directly. Your changes and the unchanged ports are confirmed. You can now disconnect USB.
How satisfied are you with the power-port configuration? Your optional review helps us and other eBike riders.
Review BlauWerkTechnical help and transfer log
The website stores the order bound to the bicycle and selection. Initial values, target and readback are also stored in this browser. The downloaded log contains the bicycle ID. Share it only to resolve this operation.
Acknowledging a write command alone does not prove success. Interrupted transfers are never retried automatically.
What does the check read?
BlauWerk reads the stored Low Power Port and High Power Port states and the manufacturer’s permission for each port. Only reliably read ports with permission to change them are offered. An unknown value is never treated as disabled.
Power ports and lighting activation
This service adjusts the additional Low Power Port (LPP) and High Power Port (HPP) outputs. The separate lighting activation service changes lighting settings. They are different functions. Port settings do not confirm a fitted connector, wiring, power delivery or your accessory’s electrical suitability. Follow the bike and accessory manufacturers’ instructions.
How the change works
Connect your e-bike, read the settings and review your selection. Pay once for the combined selection or use an eligible voucher. You then return to the original USB tab and explicitly confirm the write. Both port settings are read back directly afterwards.
After confirmation
A successful readback completes the order. Restart your e-bike afterwards and check the accessory on the bike. Restarting is an instruction for use, not an extra step in our write process. If the outcome is uncertain, your existing order remains available; do not pay again.
Questions about Bosch e-bike power ports
How much does changing both ports cost?
One combined order costs €4.99 total including 19% German VAT, whether you change one or both ports. Reading and previewing are free.
Can I enable Low Power Port (LPP) and High Power Port (HPP)?
The bike must be supported, both port states must be readable and the manufacturer must permit changes to the selected port. Manufacturer restrictions are not bypassed.
What does “Leave unchanged” mean?
That port is not written. Its current state remains part of the target configuration and is checked again after the change.
Does this test the connected accessory?
No. This checks stored settings, not connectors, wiring or attached equipment. Check physical and electrical suitability against the manufacturers’ instructions.
Does payment start the write automatically?
No. The payment page returns you to the original USB tab. You review the preview and explicitly confirm the write there.
Can I disable a port again?
You can select Disable if the manufacturer permission read from the bike allows it. A later change is a new order, not an automatic reversal.
When is the operation successful?
Only when both settings have been read back from the same e-bike and match your selection. Any port you did not select must also remain unchanged.
What happens after an interruption or an ID conflict?
An uncertain write is never retried automatically. Open the existing order in the same browser and check its status. A detected ID conflict must first be resolved separately.